Have low water pressure?

This is one our most common problems that we receive. Toilet part makers now have to make their toilets work with low pressure toilets. They are also commonly referred to as low flush toilets and modern toilets, and they’ve been in use in the U.S. since 1994 when a federal regulation mandated that only 1.6 gallons (6 liters) of water be used per flush. This change was enacted in response to environmental concerns and in result there has been a huge surge in clogged toilet issues. Also:

s from the water treatment plant.

   To call toilets “water-savers”, manufacturers lowered the overflow tube

    Lowering the height of the overflow tube makes the tank hold less water

    Less water means less water volume and less water pressure to flush

What do I need to turn my toilet into a power flusher?

If your parts are damaged, than you need a replacement. Other companies are making the mistake by making valves and toilet parts over-complicated. NuFlush believes in the K.I.S.S. (Keep It Simple Stupid) approach. Toilets are simple machines and we offer simple solutions. Don’t pay the plumber when we offer DIY options that are affordable and takes 5 minutes to install.

Standard Mini Pilot Toilet Valve

Standard Mini Pilot Fill Valve

This is a simple replacement for any other fill valve you currently have. We make our valves based on water pressure. You do not need all of those clunky fill valves or floats that damage easily. This sits at the bottom of your tank and shuts off and on when needed. No run-ons and makes little to no noise!

Learn More!



Turbo Toilet Tune-up Kit

High-Speed Fill-up Valve and 6 Extension Tubes will change your toilet into a power flusher.

Learn More!



Anti-siphon Toilet fill Valve by NuFlush, Buy direct and save big.

Anti-siphon Toilet fill Valve by NuFlush, Buy direct and save big. “NuFlush Universal Anti-siphon Toilet Tank Fill Valve”. Buy direct from NuFlush and save big. This fill valve fills the toilet tank with water from the water supply line after it has been emptied by a flush. It replaces the Ball cock and is more efficient and easy to install. This is an anti-siphon design-fill valve with adjustable height from 9" to 14". One of the most used new fill valves in the world. Replace your old style Ball Cock valve with a better performing NuFlush fill valve.

Learn More!



Toilet flapper valve three inch, silicone seal, new design. counter balanced.

It is important to maintain your household toilet, including the flapper valve. You may not be aware of the loss of water down the drain, a leaky flapper valve can waste thousands of gallons of water annually. This is why it makes sense to do regular checks of all of your toilet’s working parts, including the Toilet Flapper Leaking and Toilet Tank Leaking valve. Your toilet has two main valves which are contained in your toilet’s tank. One is your flapper valve; the other is the refill valve or ball & cock. If your toilet flapper valve fails to seat properly, water will leak from your toilet tank into the bowl, which will then be replaced. The fill valve will turn on and off as the water goes down the sewer. The water going out of your toilet is hard to detect. This common problem with flapper valves causes a continuous flow of water which can really be a big waste of water. If you have a leaky flapper valve, this can translate into a lot of money over time.

Learn More!